ET1 Enterprise Tablet Quick Start Guide

Magnetic Stripe Card Reading

Use the Scanning/MSR Module to read magnetic stripe card.

1. Ensure that DataWedge is enabled and the cursor is in a text

field.

2. Align the magnetic stripe on the card toward the display and

swipe the card in either direction.

Connect to a Bluetooth Device

To enable Bluetooth:

1. Touch > Wireless & networks.

2. Slide the Bluetooth switch to the ON position. The Bluetooth

icon appears in the Status bar indicating that Bluetooth is

enabled.

3. Touch Bluetooth. The ET1 begins searching for discoverable

Bluetooth devices in the area and lists them under

AVAILABLE DEVICES.

4. Scroll through the list and select a device. The Bluetooth

pairing request dialog box appears.

5. Enter a PIN and touch OK, if required.

6. Touch .

NOTE Refer to the ET1 Enterprise Tablet User Guide for

supported Bluetooth profiles.