ET1 Enterprise Tablet Quick Start Guide

9
Reset
Reset the ET1 if applications stop responding. Press and hold
the Power button until the dialog box appears then touch Reset.
Power Off
To power off the ET1, press and hold the Power button until the
dialog box appears, then touch Power off. When the Power off
dialog box appears, touch OK.
Hardware Reset
If the ET1 stop responding, perform a hardware reset.
Simultaneously press the Left Scan/Action, Right Scan/Action
and Power buttons.
Lock the Screen
Lock the screen to protect access to data. When locked, a
Pattern, PIN or Password is required to unlock the ET1. Press
the Power button to lock the screen. The ET1 also locks after a
pre-defined time-out.
Press and release the Power button to wake the ET1.
The Lock screen displays. Slide up to unlock the screen. If
the Pattern screen unlock feature is enabled, the Pattern screen
appears instead of the Lock screen.
If the PIN or Password screen unlock feature is enabled, enter
the PIN or password after unlocking the screen.
Refer to the ET1 Enterprise Tablet User Guide for setup
instruction for locking the screen. If the Multi-user feature is
enabled, contact the system administrator for login information.
Change Volume
Press P1 to decrease the volume. Press P2 to increase the
volume. Note that these buttons are programmable and can be
changed by the user or application.