Cordless Phone Manual

Using the phone 21
2. Press MENU and then VOL+ or REDIAL/VOL- to select
FLASH TIME .
3. Press MENU and then VOL+ or REDIAL/VOL- to the
flash time you want. (8 options are available :
90 , 100 , 110 ,
250 , 300 , 400 , 600 and 700MS )
4. Press MENU to save.
3.17 Setting the area code
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP BS .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
AREA CODE .
3. Press MENU and then enter the area code.
4. Press MENU to save.
3.18 Registration
3.18.1 Registering a handset
Up to 5 handsets can be registered to one base. The original
handset is pre-registered to use. Additional handsets must
be registered to the base before you can use them.
To register an additional handset,
1. Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP HS .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
REGISTRATION .
3. Press MENU and then VOL+ or REDIAL/VOL- to select
YES or NO .
4. Select
YES then press MENU to enter the registration
procedure as follows:
1. Press and hold FIND for around 4 seconds on the base.
2. Place the unregistered cordless handset on the base
or charger.
3. A confirmation tone is generated if registration is
successful.
HANDSET X is displayed where X denotes
the number of handsets, and then the phone returns
to idle.
To register an originally unregistered handset, follow steps 1
through 3 above.