Network Router User Manual

ENGLISH

Ethernet

1,2,3,4

• Make sure you are using the Ethernet cable, not the DSL cable. The Ether-

net cable is thicker than the standard telephone cable.

• Make sure the Ethernet cable is securely plugged into the Ethernet jack on

the PC.

• Make sure the Ethernet cable is securely plugged into the Ethernet port on

the DSL Gateway.

• Try another Ethernet cable if you have one available.

• Make sure you have Ethernet drivers installed on the PC.

• Make sure the PC’s TCP/IP Properties for the Ethernet Network Control

Panel is set to obtain an IP address via DHCP.

• Make sure the PC has obtained an address in the 192.168.1.x range. (You

may have changed the subnet addressing.)

• Make sure the PC is configured to access the Internet over a LAN.

• Disable any installed network devices (Ethernet, HomePNA, wireless) that

are not being used to connect to the DSL Gateway.