Network Router User Manual

Motorola 2247-N8 DSL Wi-Fi Gateway User Guide
Please visit www.motorola.com/us/support for FAQs and additional product documentation. 6
3. Power the 2247-N8.
Connect the power supply to the power jack on the back panel
of the 2247-N8.
Plug the power supply into an electrical outlet.
Turn on the Power switch.
The Power light (on the front of the 2247-N8) should light solid
green.
Connecting Power
4. Wait for the DSL light on the front of the 2247-N8 to turn solid green
(steady and not blinking). This may take up to five minutes.
To connect a wireless device, continue with Wireless (Wi-Fi) Network
Setup on page 8. To connect a wired device, continue with Wired
(Ethernet) Network Setup on page 13.
Connecting the Gateway (Continued)
0OWERJACK
!#POWERCORD
0OWERSWITCH