CONTENTS Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . .5 Package Contents . . . . . . . . . . . . . . . . . . . . . .5 Batteries and Chargers Safety Information . . . . . . . . . . . . . . . . . . . .7 Operational Safety Guidelines. . . . . . . . . . . . .8 FCC Licensing Information . . . . . . . . . . . . .9 Interference Information . . . . . . . . . . . . . . . . .9 Radio Overview . . . . . . . . . . . . . . . . . . . .
CONTENTS Getting Started . . . . . . . . . . . . . . . . . . . . . .29 Turning radio ON/OFF. . . . . . . . . . . . . . . . . .29 Adjusting Volume . . . . . . . . . . . . . . . . . . . . .29 Selecting a Channel . . . . . . . . . . . . . . . . . . .29 Talking and Monitoring . . . . . . . . . . . . . . . . .29 Receiving a Call . . . . . . . . . . . . . . . . . . . . . .30 Talk Range . . . . . . . . . . . . . . . . . . . . . . . . . .30 Radio LED Indicators . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . .56 Use and Care . . . . . . . . . . . . . . . . . . . . . . .60 Frequency and Code Charts . . . . . . . . . . .61 RDX VHF Frequencies Chart . . . . . . . . . . . .61 RDV2020 - VHF Default Frequencies Chart . . . . . . . . . . . . . .63 RDV5100 - VHF Default Frequencies Chart . . . . . . . . . . . . . .64 RDX UHF Frequencies Chart . . . . . . . . . . . .65 RDU2020 - UHF Default Frequencies Chart . . . . . . . . . . . . . .
SAFETY PRODUCT SAFETY AND RF EXPOSURE COMPLIANCE ! SAFETY Caution Before using this product, read the operating instructions and RF energy awareness information contained in the Product Safety and RF Exposure booklet enclosed with your radio. ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. English 4 For a list of Motorola-approved antennas, batteries, and other accessories, visit the following website which lists approved accessories: www.
INTRODUCTION Business Radios, RPSD 1C15, Motorola Thank you for purchasing the Motorola® RDX Series™ Radio. This radio is a product of Motorola's 75 plus years of experience as a world leader in the designing and manufacturing of communications equipment. The RDX Series™ radios provide cost-effective communications for businesses such as retail stores, restaurants, schools, construction sites, manufacturing, property and hotel management and more.
For a copy of a large-print version of this user guide or for product-related questions, contact: 1-800-448-6686 in the USA 1-800-461-4575 in Canada INTRODUCTION 1-866-522-5210 on your TTY (Text Telephone) English 6 For product information visit us at: www.motorolasolutions.
3. and cord, pull by the plug rather than the cord when disconnecting the charger. 4. extension cord could result in risk of fire and electric shock. If an extension cord must be used, make sure that the cord size is 18AWG Before using the battery charger, read all the instructions and cautionary markings on the charger, • the battery, and • the radio using the battery 1. To reduce risk of injury, charge only the for lengths up to 6.5 feet (2.0 m), and 16AWG for lengths up to 9.8 feet (3.0 m). 5.
BATTERIES AND CHARGERS SAFETY INFORMATION English OPERATIONAL SAFETY GUIDELINES • Turn the radio OFF when charging battery. • The charger is not suitable for outdoor use. Use only in dry locations/conditions. • Connect charger only to an appropriately fused and wired supply of the correct voltage (as specified on the product). • Disconnect charger from line voltage by removing main plug. 8 • The outlet to which this equipment is connected should be nearby and easily accessible.
(FCC). To transmit on these frequencies, you FCC LICENSING INFORMATION are required to have a license issued by the FCC. Application is made available on FCC INTERFERENCE INFORMATION This device complies with Part 15 of the FCC Form 601 and Schedules D, H, and Remittance Form 159. To obtain these FCC forms, request document this device does not cause harmful 000601 which includes all forms and interference. instructions.
Before filling out your application, you must Replacement of any transmitter component decide which frequency(ies) you can operate (crystal, semiconductor, etc.) not authorized by on. See “Frequencies and Code Charts”. For the FCC equipment authorization for this radio questions on determining the radio frequency, could violate FCC rules.
RADIO OVERVIEW PARTS OF THE RADIO Antenna Microphone Channel Selector Knob On/Off/Volume Knob LED Indicator PTT Button SB1-Monitor Button Model Label Lithium-Ion Battery SB2- Scan/ Nuisance Channel Delete 11 RADIO OVERVIEW Accessory Connector English
On/Off/Volume Knob Side Buttons Used to turn the radio ON or OFF and to adjust the radio’s volume. Push-to-Talk (PTT) Button • Channel Selector Knob Used to switch the radio to different channels. Side Button 1 (SB1) • Accessory Connector Used to connect compatible audio accessories. RADIO OVERVIEW The Side Button 1 is a general button that can be configured by the Computer Programming Software - CPS. The default setting of SB1 is ‘Monitor’.
This User Guide covers multiple RDX Series™ models, and may detail some features your radio does not have.
BATTERY FEATURES RDX Series™ radios provide Lithium-Ion batteries that come in different capacities that will define the battery life. It also offers the option to use Alkaline batteries. About the Li-Ion Battery RADIO OVERVIEW The RDX Series™ radio comes equipped with a rechargeable Li-Ion battery. This battery should be charged before initial use to ensure optimum capacity and performance. English Battery life is determined by several factors.
Battery Recycling and Disposal Many retailers and dealers participate in this program. For the location of the drop-off facility closest to you, access RBRC's Internet web site at: www.rbrc.com or call: 1-800-8-BATTERY This internet site and telephone number also provides other useful information concerning recycling options for consumers, businesses and governmental agencies. RADIO OVERVIEW Li-Ion rechargeable batteries can be recycled. However, recycling facilities may not be available in all areas.
Installing the Lithium-Ion (Li-Ion) Battery Removing the Lithium-Ion (Li-Ion) Battery Battery Latch Battery Latch RADIO OVERVIEW slots English 1. Turn OFF the radio. 1. Turn OFF the radio. 2. With the Motorola logo side up on the battery 2. Push down the battery latch and hold it pack, fit the tabs at the bottom of the battery into the slots at the bottom of the radio’s body. 3. Press the top part of the battery towards the radio until a click is heard.
Alkaline Battery Pack (Optional Accessory) Removing Alkaline Batteries Installing Alkaline Batteries Alkaline Battery Door Turn OFF the radio, if it is turned ON. 2. Remove Li-Ion battery. 3. Assemble alkaline battery pack in the same steps as installing the Li-Ion battery pack. 4. Remove battery door from alkaline battery pack. 5. Slide the 5 AA alkaline batteries into the frame, 1. Turn OFF the radio, if it is turned ON. 2. Slide the battery latches, on both sides of the battery, downwards.
Attaching and Removing Antenna RADIO OVERVIEW These instructions apply ONLY to models RDU4100 and RDV5100. Do not attempt to remove the antenna if your radio is not one of these models. English Attaching the Antenna Removing the Antenna 1. 1. Align the threaded end of the antenna with the radio’s antenna connector. 2. Turn the antenna clockwise to fasten it. 18 Turn the antenna counterclockwise until you can remove it.
Installing Spring Action Belt Clip Power Supply, Adaptor and Drop-in Tray Charger Belt Clip Tab Power Supply Spring Action Belt Clip 1. Slide the spring action belt clip rails into the belt Drop-in Tray Charger The radio is equipped with one Drop-in Tray Charger and one Power Supply with Adaptor. For details, see “Chargers” on page 81. clip grooves on the back of the battery pack and RADIO OVERVIEW slide it down until the belt clip tab snaps into place. 2.
Battery Life Information When the Battery Save feature is ON (enabled by default) the battery life will be longer. The following chart summarizes battery life estimations: Li-Ion Battery Life with Battery Save feature ON RADIO OVERVIEW Battery Type English 4 Watts 2 Watts Standard 8.5 hours 8.5 hours 12 hours High 17 hours 17 hours 24 hours Ultra High 18.5 hours 18.
Alkaline Battery Life The following chart estimates the Alkaline battery life: Alkaline Battery Life Battery Save Feature ON 5 Watts 26 hours* 4 Watts 26 hours* 2 Watts 26 hours Notes: • Battery life are being estimated based on 5% transmit/ 5% receive/ 90% standby standard duty cycle.
Charging the Battery RDX Series™ offers two types of chargers : • Standard Charger and, • Rapid Charger. Note: Charging with the Drop-in Tray Single Unit Charger (SUC) Power Supply (Transformer) The radio comes equipped with a Standard Charger To charge the battery (with the radio attached), place it in a Motorola-approved Drop-in Tray Single Unit Charger or Drop-in Tray Multi Unit Charger.
Charging a Standalone Battery Charging a Standard Battery The drop-in tray charger has a removable bracket that is adjustable depending on the type of battery that needs to be charged. It is designed to charge either the battery (with the radio) or a standalone battery. The drop-in tray charger's default position will charge a standard battery.
Charging a High Capacity or Ultra High Capacity Battery 3. Repeat same procedure to return to the charging a Standard Battery position. Label on the removable bracket should show ‘Standard Removable Piece Removable Piece Battery’ facing front. Turn around horizontal 180 degree RADIO OVERVIEW To convert the charger from the default setup to accommodate the High capacity or Ultra High capacity battery: 1.
Drop-in Tray Charger LED Indicators Standard Charger LED Indicator Status LED Status Comments Power ON Steady red indication for 3 seconds The charger has powered up Charging Blinking red (slow) The charger is currently charging Charging Complete Steady red indication Battery is fully charged Battery Fault(*) Blinking red (fast) Battery had a fault when battery was inserted Notes: • (*) Normally re-seating the battery pack will correct this issue.
Rapid Charger LED Indicator Status LED Status Comments Power ON Steady green indication for 3 The charger has powered up seconds Charging Blinking green The charger is currently charging Top-off Charging Blinking green (slow) Battery is near fully charged Charge Complete Steady green indication Battery is fully charged Battery Fault (*) Blinking red (fast) Battery has a fault when battery was inserted Waiting to Charge (**) Double-blink yellow indications Battery charging conditions not su
Estimated Charging Time The following table provides the estimated charging time of the battery. For further details, see “Battery” on page 80. Estimated Charging Time Battery Type Charging Solution High Capacity Ultra High Capacity Standard Charging Solution 7 hours 12 hours 13 hours Rapid Charging Solution 1.5 hours 3 hours 3.
Charging a Radio and Battery using a Multi Unit Charger- MUC (Optional Accessory) Notes: • This Multi Unit Charger also allows you to clone up to 3 radios (3 Source radios and 3 Target radios). Refer to page 51 for details. • Further details on MUC’s operation are explained in the Instructions Sheet provided with the MUC. For part number details, refer to the Accessories RADIO OVERVIEW section. The Multi Unit Charger (MUC) allows drop-in charging of up to 6 radios or batteries.
For the following explanations, refer to “Parts of the Radio” on page 11. TURNING RADIO ON/OFF To turn ON the radio, rotate the On/Off/Volume Knob clockwise. The radio will chirp and the LED Indicator will briefly blink red. SELECTING A CHANNEL To select a channel, rotate the Channel Selector Knob and select the desired channel number. GETTING STARTED GETTING STARTED Program each channel separately. Each channel has its own Frequency, Interference Eliminator Code and Scan Settings.
TALK RANGE GETTING STARTED Notes: • To listen to all activity on a current channel, short This feature is called ‘CTCSS/DPL Defeat (Squelch set to SILENT)’. • (*) This assumes SB1 is not being programmed for a different mode. Industrial Model Multi-Level Inside steel/concrete Inside multi-level Industrial buildings buildings RECEIVING A CALL UHF 4W Up to 350,000 Sq. Ft. Up to 30 Floors 1. VHF 5W Up to 300,000 Sq. Ft. Up to 18 Floors UHF 2W Up to 250,000 Sq. Ft.
1. Channel: Current channel that the radio is 4. Scramble Code: Codes that make the transmissions sound garbled to anyone listening who is not set to that specific code. For details on how to set up frequencies and CTCSS/DPL codes in the channels, refer to “Programming Selection Mode” in page 36. using, depending on radio model. 2. Frequency: The frequency the radio uses to 3. Interference Eliminator Code: These codes transmit/receive.
GETTING STARTED RADIO LED INDICATORS RADIO STATUS Channel Alias Edit Red heartbeat Channel Busy Solid orange Cloning Mode Two orange heartbeats Cloning In Progress Solid orange Fatal Error at Power up One green blink, one orange blink, one green blink, then repeat for 4 seconds Low Battery Orange blink Low Battery Shutdown Orange heartbeat Monitor LED is OFF Power-Up Solid red for 2 seconds ‘Idle’ Programming Mode / Channel Mode Green heartbeat Scan Mode Red heartbeat Transmit (Tx)/Re
HANDS-FREE USE/VOX Turn the radio OFF. 2. Open accessory cover. 3. Insert the audio accessory’s plug firmly into accessory port. 4. Turn radio ON. The LED Indicator will blink double red 5. Lower radio volume BEFORE placing accessory near ear. VOX Accessory Accessory Port/ Connector Motorola RDX Series™ radios can operate hands-free (VOX) when used with compatible VOX accessories. With Compatible VOX Accessories 6. GETTING STARTED 1.
GETTING STARTED Setting VOX Sensitivity Battery Save The sensitivity of the radio's accessory or microphone can be adjusted to suit different operating environments. VOX sensitivity can be programmed via the CPS. Battery Save feature extends battery life as your radio goes into ‘Idle’ state. To enable/ disable press SB1 and SB2 buttons simultaneously for 2 or 3 seconds while powering up the radio until you hear a quick series of beeps.
GETTING STARTED End of Transmission Tone (Roger Beep Tone) To enable/disable End of Transmission Tone, short press the SB1 button while turning ON the radio .
PROGRAMMING FEATURES PROGRAMMING FEATURES To easily program all the features in your radio, it is recommended to use the CPS Programming Cable and CPS software. CPS software download is available for free at www.motorolasolutions.com/RDX PROGRAMMING MODE Programming Mode is a special radio mode to program basic radio's features by using the radio’s panel.
PROGRAMMING MODE 1 2 Frequencies First Digit PTT Idle Programming Mode Exit Figure 1: PTT First Digit PTT Long PTT Second Digit PTT Third Digit PROGRAMMING FEATURES (PTT + SB1 + Turn ON radio) Second Digit Long PTT PTT Enter Programming Mode CTCSS/DPL PTT 3 PTT “Roll Over” key chirp Auto- Scan ON / OFF Long PTT Entering Programming Mode 37 English
Programming Mode: Reading the Values Number PROGRAMMING FEATURES 0 English 38 Confirmation Beep Zero beep LED Indication One orange blink 1 One beep One short red blink 2 Two beeps Two short red blinks 3 Three beeps Three short red blinks 4 Four beeps Four short red blinks 5 Long beep One long red blink 6 Long beep and one beep One long and one short red blinks 7 Long beep and two beeps One long and two short red blinks 8 Long beep and three beeps One long and three short red b
Entering Programming Mode Note: Before programming the features, make sure your radio is set to the channel you wish to program. You can do so before entering Programming Mode or at any time during the Programming Mode by turning the Channel Selector Knob to the desired channel Note: Reading Frequencies Values When reading frequencies values you need to read two digits as RDX Series™ radios have 27 frequencies for VHF and 89 frequencies for UHF.
value. If you short press the PTT button again, the radio will signal you the second digit value.
Reading Auto-Scan Values After reading the CTCSS/DPL codes, short press the PTT button and the radio will take you to Auto-Scan (refer to Stage 3 of Figure 3: Entering Programming Mode on page 40). Auto-Scan only has two values: It means AutoScan is... 0 OFF 1 ON • Note: Auto-Scan is set to OFF by default. While in Auto-Scan Mode, if you short press PTT button, the radio will return to the ‘Idle’ Programming Mode.
• If you ‘roll-over’ to the beginning at Idle 2. code) value but the radio would not do it. LED Indicator will start blinking green again. All It rolled over and took me back to value values that were changed will be automatically ‘0’. saved. Programming Mode FAQ PROGRAMMING FEATURES 1. I got distracted while programming and forgot which digit I was programming.
4. When I was programming I made a this channel and want to program another channel. If you make a mistake while programming a value you have two choices: The radio roll-over (and generates a 'wrap(9) or minimum (0) value. Keep increasing (short press SB1) or decreasing (short pressing SB2) until you get the desired value or, 5. Turn OFF the radio and start-over. I just programmed the value I wanted.
• Short press the PTT button to enter Frequency Example of Programming a Code Mode. Radio will signal current value ‘0’ (orange • Press the SB1 button once to increase first digit to ‘1’. Assuming current code value is set to factory default ‘001’, and you want to change it to CTCSS/DPL Code = 103 follow the sequence below: • Short press the PTT button once to move ahead • Enter Programming Mode • Short press the PTT button three times (Enter blink) and program the frequency’s second digit.
• Short press the PTT button and move ahead to Example of Programming Auto-Scan program the third digit. LED Indicator will blink Auto-Scan is the last Programming Mode and can be set to either ON or OFF on a particular channel. red to indicate current value is ‘1’. • Press the SB1 button to change the ‘third digit’ to ‘2’. Press the SB1 button to change again this ‘third digit’ to ‘3’. Radio will signal the chosen value.
PROGRAMMING FEATURES OTHER PROGRAMMING FEATURES which was selected before Scan was activated. If Scan no transmission occurs within five seconds, Scan allows you to monitor other channels to detect conversations. When the radio detects a transmission, it will stop scanning and will stop on the active channel. This will allow you to listen and talk to people on that channel without having to change the channel knob.
Editing Scan List To delete a channel from the Scan List: Scan Lists can be edited by using the CPS (refer to CPS section on page 48) • Start Scan by short pressing the SB2 button (*) • Wait until the radio stops on the channel you wish to eliminate, then long press the SB2 button to Nuisance Channel Delete delete it. • The channel will not be removed until you exit Scan by short pressing the SB2 button again or by turning the radio OFF.
CPS (COMPUTER PROGRAMMING SOFTWARE) Radio to be programmed oftware PROGRAMMING FEATURES CPS S USB Connector Drop-in Charger Tray Mini Connector CPS Programming Cable The easiest way to program or change features in your radio is by using the Computer Programming Software (CPS) and the CPS Programming Cable(*). CPS Software is available for free as web based downloadable software at: www.motorolasolutions.
Time-Out Timer Battery Type Setting When pressing the PTT button, transmissions can be terminated by setting up a 'time-out’ timer. The RDX Series™ radio can be powered by either Alkaline or Lithium-Ion batteries. Power Select Call Tones feature allows you to transmit to other radios in your group by alerting them that you are about to talk or alerting them without speaking. Note: Some frequencies may have FCC transmit power restrictions that do not allow them to be set at a higher power level.
Scramble Notes: The Scramble feature makes transmissions sound garbled to anyone listening without the same code. Scramble default value is OFF. • PROGRAMMING FEATURES Reverse Burst English Reverse Burst eliminates unwanted noise (squelch tail) during loss of carrier detection. You can select values of either 180/240. 50 The features described in previous pages are just some of the features CPS has. CPS offers more capabilities. For more information refer to the HELP file in the CPS.
CLONING RADIOS You can clone RDX Series™ radio profiles from one Source radio to a Target radio by using any one of these 3 methods: or copied from) and • a Target radio (the radio which profile will be cloned from the source radio.
• Wait for 3 seconds before releasing the buttons until a distinctive audible tone is heard. 3. Place the Source radio in the source pocket that pairs with the target pocket you chose in step 1. Press and release SB1. 4. After cloning is completed, the Source radio will PROGRAMMING FEATURES sound either a ‘pass’ tone (cloning was When ordering the MUC, please refer to P/N RLN6309. Notes: • run successfully. failed).
Cloning Radio using the Radio to Radio (R2R) Cloning Cable (Optional Accessory) 2. Unplug any cables (power supply or USB cables) from the SUCs. 3. Plug one side of the cloning cable mini connector to one SUC. Plug the other end to the second SUC. Note: 4. Turn ON the Target radio and place it into one of 5. On the Source radio, power the radio following the SUCs. the sequence below: Operating Instructions 1.
7. After cloning is completed, the Source radio will 3. sound either a ‘pass’ tone (cloning was successful) or a ‘fail’ tone (cloning process has to the radio. 4. failed). The ‘pass’ tone sounds like a good key ‘chirp’ whereas the ‘fail’ tone sounds similar to a ‘bonk’ tone. If the Source radio is a display model, it will either show ‘Pass’ or ‘Fail’ on the PROGRAMMING FEATURES display (a tone will be heard within 5 seconds). 8. Ensure that the Source radio is in cloning mode. 6.
Cloning using the CPS (Computer Programming Software) Information on how to clone using the CPS is available either in: When cloning using this method, you will need to have the CPS software, a Drop-in Tray Charger and the CPS Programming Cable. • the CPS Help File --> Content and Index --> • in the CPS Programming Cable Accessory To order the CPS Programming Cable, please refer to P/N RKN4155. Cloning Radios, or Leaflet.
TROUBLESHOOTING Symptom Try This... Recharge or replace the Li-Ion battery. No Power Reposition or replace AA batteries. Extreme operating temperatures may affect battery life. Refer to See “About the Li-Ion Battery” on page 14. Confirm Interference Eliminator Code is set. Hearing other noises or conversation on a channel Frequency or Interference Eliminator Code may be in use. Change settings: either change frequencies or codes on all radios.
Symptom Try This... Steel and/or concrete structures, heavy foliage, buildings or vehicles decrease range. Check for clear line of sight to improve transmission. Wearing radio close to body such as in a pocket or on a belt decreases range. Change location of radio. To increase range and coverage, you can either Limited talk range reduce obstructions, increase power, or use UHF radio instead of VHF radio. UHF radios provide greater coverage in industrial and commercial buildings.
Symptom Try This... Radios are too close; they must be at least five feet apart. Heavy static or interference Radios are too far apart or obstacles are interfering with transmission. Refer to “Talking and Monitoring” on page 29. Recharge or replace Li-Ion battery. Replace AA batteries. Low batteries Extreme operating temperatures affect battery life. Refer to “About the Li-Ion Battery” on page 14.
Symptom Try This... VOX feature might be set to OFF. Cannot activate VOX Use the CPS to ensure that the VOX Sensitivity level is not set to ‘0’. Accessory not working or not compatible. Refer to “Hands-Free Use/VOX” section on page 33. Check drop-in tray charger is properly connected and correspond to a compatible power supply.
USE AND CARE USE AND CARE Use a soft damp cloth to clean the exterior Do not immerse in water Do not use alcohol or cleaning solutions If the radio is submerged in water...
FREQUENCY AND CODE CHARTS RDX VHF FREQUENCIES CHART The charts in this section provide Frequency and Code information. These charts are useful when using Motorola RDX Series™ two-way radios with other business radios. Most of the frequency’s positions are the same as Spirit M, GT, S, and XTN Series Frequencies. Frequency # Frequency # Frequency (MHz) Bandwidth 1 151.6250 12.5 kHz 12 151.6850 12.5 kHz 2 151.9550 12.5 kHz 13 151.7150 12.5 kHz 3 152.8850 12.5 kHz 14 151.7450 12.
RDX VHF Frequencies (cont.) FREQUENCY AND CODE Frequency # English Frequency Bandwidth (MHz) Frequency # Frequency (MHz) Bandwidth 23 154.500 12.5 kHz 26 158.4000 12.5 kHz 24 153.0050 12.5 kHz 27 158.4075 12.5 kHz 25 154.5475 12.5 kHz Notes: • (*) Due to FCC regulations these frequencies (six in total) are different from the previous Motorola Legacy Series radios.
RDV2020 - VHF DEFAULT FREQUENCIES CHART BRUS RDX VHF 2CH Radios Default Frequencies - RDV2020 Frequency # Frequency (MHz) Code # Code Bandwidth 1 20 154.4900 1 67.0 Hz 12.5 kHz 2 21 154.5150 1 67.0 Hz 12.
RDV5100 - VHF DEFAULT FREQUENCIES CHART RDX VHF 10CH Radios Default Frequencies - RDV5100 Frequency # Frequency (MHz) Code # Code Bandwidth 1 1 151.6250 1 67.0 Hz 12.5 kHz 2 1 151.6250 4 77.0 Hz 12.5 kHz 3 1 151.6250 8 88.5 Hz 12.5 kHz 4 1 151.6250 29 179.9 Hz 12.5 kHz 5 1 151.6250 0 - 12.5 kHz FREQUENCY AND CODE Channel English 64 6 2 151.9550 1 67.0 Hz 12.5 kHz 7 2 151.9550 6 82.5 Hz 12.5 kHz 8 2 151.9550 10 94.8 Hz 12.5 kHz 9 2 151.9550 29 179.
RDX UHF FREQUENCIES CHART RDX UHF Frequencies Frequency (MHz) Bandwidth Frequency # Frequency (MHz) Bandwidth 1 464.5000 12.5 kHz 14 461.1625 12.5 kHz 2 464.5500 12.5 kHz 15 461.1875 12.5 kHz *3 467.7625 12.5 kHz 16 461.2125 12.5 kHz *4 467.8125 12.5 kHz 17 461.2375 12.5 kHz *5 467.8500 12.5 kHz 18 461.2625 12.5 kHz *6 467.8750 12.5 kHz 19 461.2875 12.5 kHz *7 467.9000 12.5 kHz 20 461.3125 12.5 kHz *8 467.9250 12.5 kHz 21 461.3375 12.5 kHz 9 461.
FREQUENCY AND CODE RDX UHF Frequencies (Continued) English Frequency # Frequency (MHz) Bandwidth Frequency # Frequency (MHz) Bandwidth *27 462.8625 12.5 kHz 38 466.1375 12.5 kHz *28 462.8875 12.5 kHz 39 466.1625 12.5 kHz *29 462.9125 12.5 kHz 40 466.1875 12.5 kHz 30 464.4875 12.5 kHz 41 466.2125 12.5 kHz 31 464.5125 12.5 kHz 42 466.2375 12.5 kHz 32 464.5375 12.5 kHz 43 466.2625 12.5 kHz 33 464.5625 12.5 kHz 44 466.2875 12.5 kHz 34 466.0375 12.
RDX UHF Frequencies (Continued) Bandwidth Frequency # Frequency (MHz) Bandwidth *49 467.8375 12.5 kHz 61 467.1875 12.5 kHz *50 467.8625 12.5 kHz 62 467.4625 12.5 kHz *51 467.8875 12.5 kHz 63 467.4875 12.5 kHz *52 467.9125 12.5 kHz 64 467.5125 12.5 kHz 53 469.4875 12.5 kHz 65 451.1875 12.5 kHz 54 469.5125 12.5 kHz 66 451.2375 12.5 kHz 55 469.5375 12.5 kHz 67 451.2875 12.5 kHz 56 469.5625 12.5 kHz 68 451.3375 12.5 kHz 57 462.1875 12.5 kHz 69 451.
FREQUENCY AND CODE RDX UHF Frequencies (cont.) English Frequency # Frequency (MHz) Bandwidth Frequency # Frequency (MHz) Bandwidth 73 452.5375 12.5 kHz 82 456.4375 12.5 kHz 74 452.4125 12.5 kHz 83 456.5375 12.5 kHz 75 452.5125 12.5 kHz 84 456.6375 12.5 kHz 76 452.7625 12.5 kHz 85 457.3125 12.5 kHz 77 452.8625 12.5 kHz 86 457.4125 12.5 kHz 78 456.1875 12.5 kHz 87 457.5125 12.5 kHz 79 456.2375 12.5 kHz 88 457.7625 12.5 kHz 80 456.2875 12.5 kHz 89 457.
RDU2020 - UHF DEFAULT FREQUENCIES CHART RDX UHF 2CH Radios Default Frequencies - RDU2020 Frequency # Frequency (MHz) Code # Code Bandwidth 1 2 464.5500 1 67.0 Hz 12.5 kHz 2 8 467.9250 1 67.0 Hz 12.
RDU4100 - UHF DEFAULT FREQUENCIES CHART RDX UHF 10 CH Radios Default Frequencies - RDU4100 Frequency # Frequency (MHz) Code # Code Bandwidth 1 1 464.5000 1 67.0 Hz 12.5 kHz 2 1 464.5000 4 77.0 Hz 12.5 kHz 12.5 kHz FREQUENCY AND CODE Channel English 70 3 1 464.5000 8 88.5 Hz 4 1 464.5000 29 179.9 Hz 12.5 kHz 5 1 464.5000 0 - 12.5 kHz 6 2 464.5500 1 67.0 Hz 12.5 kHz 7 2 464.5500 6 82.5 Hz 12.5 kHz 8 2 464.5500 10 94.8 Hz 12.5 kHz 9 2 464.5500 29 179.
CTCSS AND PL/DPL CODES CTCSS Codes CTCSS Hz CTCSS Hz CTCSS Hz 1 67.0 14 107.2 27 167.9 2 71.9 15 110.9 28 173.8 179.9 74.4 16 114.8 29 77.0 17 118.8 30 186.2 5 79.7 18 123 31 192.8 6 82.5 19 127.3 32 203.5 7 85.4 20 131.8 33 210.7 8 88.5 21 136.5 34 218.1 9 91.5 22 141.3 35 225.7 10 94.8 23 146.2 36 233.6 11 97.4 24 151.4 37 241.8 12 100.0 25 156.7 38 250.3 103.5 26 162.2 122 (*) 69.
PL/DPL Codes Code DPL Code DPL Code 39 23 55 116 71 243 FREQUENCY AND CODE DPL English 72 40 25 56 125 72 244 41 26 57 131 73 245 42 31 58 132 74 251 43 32 59 134 75 261 44 43 60 143 76 263 45 47 61 152 77 265 46 51 62 155 78 271 47 54 63 156 79 306 48 65 64 162 80 311 49 71 65 165 81 315 50 72 66 172 82 331 343 51 73 67 174 83 52 74 68 205 84 346 53 114 69 223 85 351 54 115 70 226 86 364
PL/DPL Codes (Continued) Code DPL Code DPL Code 87 365 104 565 121 754 88 371 105 606 123 645 89 411 106 612 124 Customized PL 90 412 107 624 125 Customized PL 91 413 108 627 126 Customized PL 92 423 109 631 127 Customized PL 93 431 110 632 128 Customized PL 94 432 111 654 129 Customized PL 95 445 112 662 130 Inverted DPL 39 96 464 113 664 131 Inverted DPL 40 97 465 114 703 132 Inverted DPL 41 98 466 115 712 133 Inverted DPL 42 99
FREQUENCY AND CODE PL/DPL Codes (Continued) English DPL Code DPL Code DPL Code 139 Inverted DPL 48 156 Inverted DPL 65 173 Inverted DPL 82 140 Inverted DPL 49 157 Inverted DPL 66 174 Inverted DPL 83 141 Inverted DPL 50 158 Inverted DPL 67 175 Inverted DPL 84 142 Inverted DPL 51 159 Inverted DPL 68 176 Inverted DPL 85 143 Inverted DPL 52 160 Inverted DPL 69 177 Inverted DPL 86 144 Inverted DPL 53 161 Inverted DPL 70 178 Inverted DPL 87 145 Inverted DPL 54 162 I
PL/DPL Codes (Continued) Code DPL Code DPL Code 190 Inverted DPL 99 200 Inverted DPL 109 210 Inverted DPL 119 191 Inverted DPL 100 201 Inverted DPL 110 211 Inverted DPL 120 192 Inverted DPL 101 202 Inverted DPL 111 212 Inverted DPL 121 193 Inverted DPL 102 203 Inverted DPL 112 213 Inverted DPL 123 194 Inverted DPL 103 204 Inverted DPL 113 214 Customized DPL 195 Inverted DPL 104 205 Inverted DPL 114 215 Customized DPL 196 Inverted DPL 105 206 Inverted DPL 115 216
MOTOROLA LIMITED WARRANTY FOR THE UNITED STATES AND CANADA WARRANTY What Does this Warranty Cover? English Subject to the exclusions contained below, Motorola, Inc.
Exclusions Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Altered Products.
Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products Accessories or Software is excluded from coverage. Software. Applies only to physical defects in the media that embodies the copy of the software (e.g. CDROM, or floppy disk). Length of Coverage Ninety (90) days from the date of purchase. WARRANTY Software Embodied in Physical Media.
Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, nonexclusive, royalty-free license to use that arises by operation of law in the sale of a product. EXPORT LAW ASSURANCES This product is controlled under the export regulations of the United States of America.
ACCESSORIES ACCESSORIES ANTENNAS Part No. Description RAN4033 UHF Stubby Antenna 450-470 MHz RAN4041 VHF Helical Antenna 146-174 MHz RAN4031 UHF Whip Antenna 438 - 470 MHz AUDIO ACCESSORIES Part No. English Description 53815 Headset w/Boom Mic BR HMN9026 Remote Speaker Mic BR HKLN4477 Surveillance Earpiece BR 80 Part No. Description 53865 Headset w/Swivel Boom Mic 53866 Earbud w/Clip PTT Mic BR 56517 Earpiece w/Inline Mic RLN6423 Swivel Earpiece BR BATTERY Part No.
CARRY ACCESSORIES Description Part No. Description RLN6302 Hard Leather Carry Case RLN6303 Radio to Radio Cloning Cable RLN6307 Spring Action Belt Clip RKN4155 CPS Programming Cable POWER SUPPLIES AC PIN ADAPTORS Part No. RLN6349 Description North America AC Pin Adaptor CHARGERS Part No. Part No.
ACCESSORIES POWER SUPPLIES English Part No. Description RPN4054 Standard US Fixed Power Supply RPN4058 Standard Exchg AC pin Pwr Supply RLN6170 Rapid Exchg AC pin Pwr Supply 82 Attention: Certain accessories may be or may not be available at the time of purchase. For latest information on accessories, contact your Motorola point of purchase or visit: www.motorolasolutions.com/RDX (*) Americas Rapid Charging Kit includes Power Supply, Drop-in Tray Charger, and AC Pin adaptors.
M RDX Series™ Features Summary Programmable Via RADIO PANEL Programmable via CPS Features Backlight Default Value Display NonDisplay Display NonDisplay No N/A Yes N/A 5 Seconds Programming Tips Choose the backlight’s time out by using the CPS. Front panel programming available only on display Bandwidth Select Yes No Yes Yes Frequency Dependable models by entering Programming Mode (1). Bandwidth is programmable according to FCC frequency regulations.
Programmable Via RADIO PANEL Features Display NonDisplay Programmable via CPS Display NonDisplay Default Value Programming Tips Front panel radio programming available only for Call Tones (4) Yes No Yes Yes OFF / BUTTON A Display Models by going into Programming Mode(1). Values available are 0 (OFF),1, 2 and 3. To enable/disable Call Tones press Button A (default button). Only Display Models.
Programmable Via RADIO PANEL Programmable via CPS Features Default Value Display NonDisplay Display Programming Tips NonDisplay Enables radio to enter cloning mode in order to clone its profile settings into other radios (using Cloning Mode Yes Yes Yes Yes OFF Radio to Radio Cloning Cable or Multi-Unit Charger). Press PTT, SB2 while turning radio ON. Note: You can clone radios using the CPS. This feature is referred in the CPS software as “Codeplug Password”.
Programmable Via RADIO PANEL Features Display NonDisplay Programmable via CPS Display NonDisplay Default Value Any value within Frequencies, Direct Input (3) No No Yes Yes radio frequency Programming Tips Allows you to customize frequencies in your radio. Available only for certain 4W/5W radio models. band Radios Bandwidth is fixed and non-programmable. Bandwidth Range N/A N/A N/A N/A Model Dependant Bandwidth Range for 2W radios: VHF 150.
Programmable Via RADIO PANEL Programmable via CPS Features Default Value Display NonDisplay Display NonDisplay IVOX, sensitivity Level Yes N/A Yes N/A Keypad Beep ( or Keypad Tone) (2) Yes Yes Yes Yes ON Keypad Lock (2) Yes N/A Yes N/A UNLOCKED LEDs Enabled/ Disabled No No Yes Yes Enabled Low Battery Alert Shutdown N/A N/A N/A N/A ON HIGH (Level 3) Programming Tips Available for Display models only. Allows user to specify IVOX sensitivity level.
Programmable Via RADIO PANEL Features Display NonDisplay Programmable via CPS Display NonDisplay Default Value Programming Tips Front panel radio programming (only Display Maximum Channels (2) Yes No Yes Yes Model and CPS models): Set radio to Programming Mode(1) to get programmable the Maximum Channels Menu option. dependant Note: Default value is set to the maximum number of channels that the radio supports.
Programmable Via RADIO PANEL Programmable via CPS Features Default Value Display NonDisplay Display Programming Tips NonDisplay Press SB2 to start scanning and wait until the radio lands on the channel you want to delete. Long press Nuisance Ch Delete (4) Yes Yes Yes Yes SB2 Button SB2 to delete the channel. Note: The nuisance deleted channel will be restored into the scan list when the radio is turned OFF or you exit SCAN. Also known as ‘Squelch defeat’.
Programmable Via RADIO PANEL Features Programmable via CPS Display NonDisplay Display NonDisplay No N/A Yes N/A Default Value Programming Tips Text that shows up in the radio display when turned Power up Text MOTOROLA ON. Default text is MOTOROLA. Programmable via CPS. Repeater/ Talkaround (3) No No Yes Yes OFF Reset to Factory Defaults (2) Yes Yes Yes Yes Enabled Reverse Burst No Available only for RDU4160d model. Allows to restore radio's factory defaults.
Programmable Via RADIO PANEL Programmable via CPS Features Scan Default Value Display NonDisplay Display NonDisplay Yes Yes N/A N/A SB2 Button Programming Tips Short press SB2 to enable/disable scan. Use CPS for editing Scan List (adding/removing Scan List Yes No Yes Yes ON - All channels to be scanned). For display models only: Channels you can add/delete channels in the scan list using front panel by going into Programming Mode(1). Feature available only for Non Display Models.
Programmable Via RADIO PANEL Features Display NonDisplay Programmable via CPS Display NonDisplay Default Value Programming Tips Front panel radio programming available in display VOX Sensitivity Level Yes No Yes Yes OFF (level 0) models by pressing PTT or MENU buttons and scrolling down/up with and buttons to set value. Long press PTT to save. Allows to use ‘hands-free’ mode connecting microphone accessories.
Programmable Buttons Chart Button SB1 Monitor Scan / Nuisance Delete Call Tone Power Select Scramble Default SB2 BUTTON A (*) BUTTON B (*) BUTTON C (*) Default Backlight Channel Preset 1 Channel Preset 2 N/A N/A N/A N/A N/A N/A No Operation Default Default Default Notes: • Buttons come programmed to default functions. Using CPS you can assign one of the features shown in the chart, so the button can toggle values • (*) Display models only.
Icons Chart Icon Symbol Comments Battery Level Displayed during normal radio mode operation, displays battery life remaining Channel Displayed during normal radio operation and when programming channel features Code Displayed during normal radio operation and when programming codes features Frequency Displayed during normal radio operation and when programming frequency features Keypad lock Displayed whenever the Keypad lock feature is enabled (keypad is locked) Program Displayed whenever the
Icon Symbol Comments Power Select Displayed whenever the channel is transmitting or set to a high-power selection Signal Strength RSSI Display Icon numbers of bars will indicate the strength of the received signal. Vox/IVox Displayed when IVOX/VOX enabled or when programming MIC / MIC gain features.
Notes 96
*NNTN8301A* m NNTN8301A © 2007, 2011 Motorola Solutions, Inc. All rights reserved. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.