Operation Manual

Back
Next
Menu More
Connect & transfer
Wi-Fi Networks
Tur n Wi - Fi po w e r o n/of f
Find it: Apps > Settings, then touch the Wi-Fi switch to
turn it .
Note: To extend battery life, turn Wi-Fi when you’re not
using it.
Connect to networks
To find networks in your range:
1 Touch Apps > Settings > Wi-Fi.
Tip : To see your phone’s MAC address and Wi-Fi settings,
touch Menu > Advanced.
2 Make sure the switch at the top is , then touch SCAN.
3 Touch a found network to connect it (if necessary,
enter Network SSID, Security, and Wireless password, and
touch Connect).
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
Note: If you see a question mark in the Wi-Fi status
indicator , pull down the status bar, touch the network,
and enter the network’s password.
Tip: When Wi-Fi power is on, your phone automatically
reconnects to available networks it has used before
Wi-Fi hotspot
Your can make your phone a Wi-Fi hotspot to provide portable,
convenient internet access to other Wi-Fi enabled devices.
ON
OFF
ON
Note: Keep it secure. To protect your phone and hotspot from
unauthorized access, it is strongly recommended that you set
up hotspot security (WPA2 is the most secure), including
password.
Find it: Apps > Settings > More > Tethering & portable
hotspot
and check Portable Wi-Fi hotspot.
1 Your phone turns off Wi-Fi power and uses the mobile
network for Internet access. Touch Set up Wi-Fi Hotspot to
set up security:
• Network SSID: Enter a unique name for your hotspot.
•Security: Select the type of security you want: Open or
WPA2. For WPA2, enter a unique password that others
will need to access your Wi-Fi hotspot.
Note: WPA2 is recommended by IEEE.
• Hotspot frequency band: If you notice interference
after your hotspot has been active for a while, try
different channels.
•Password: Create a password with at least eight
characters.
2 To u c h Save when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled devices
can connect by entering your hotspot’s SSID, selecting a
Security type, and entering the correct Password.
Wireless display
Mirror your phone’s screen to an HDTV without any
cords—with minimal setup.
Connect & transfer
Quick start: Connect & transfer
Bluetooth® wireless
Wi-Fi Networks
USB cables
Share your data connection
Data use
NFC
Your cloud
Phone & tablet
Virtual Private Networks (VPN)
Mobile network
Airplane mode