Bluetooth Headset - Bluetooth Handsfree Headset User Manual
MAKING CALLS
Function Action
Make a voice dial call Tap the Call E
button and speak
the name after the
tone
End a call Tap the Call E
button
Redial a number Press and hold the
Call E button until
you hear a beep
Receive a call Tap the Call E
button
Reject a call Press and hold the
Call E button until
you hear a beep
Note: Your HS815 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's
guide for more information.
MAKING CALLS CONTINUED
Function Action
Answer a second Press and hold the
incoming call Call E button (places
first call on hold)
Toggle between two Press and hold
active calls the Call E button
(places other call on
hold)
Put an active call on Press and hold the
hold or resume a call Call E button until
you hear a beep
Transfer a call from the Tap the Call E
phone to the headset button
Note: If the link between the headset and phone
abnormally disconnects (for example, out of range), the
headset tries to reestablish the link.
INDICATOR LIGHTS
The indicator light provides information about
your headset status.
With the Charger Plugged In
Indicator Light Headset Status
On (steady) Charging
Off Charging complete
With No Charger Plugged In
Indicator Light Headset Status
Off Power off
On (steady) Pairing mode
10 rapid flashes Pairing successful
Slow pulse Connected
(on a call)
Quick flash Standby
(not on call)
Note: After 5 minutes of inactivity, the indicator light stops
flashing to conserve power, but the headset remains in
standby mode.
AUDIO TONES
The audio tones provide information about your
headset status.
Audio Tone Headset Status
Single high tone when Volume minimum
pressing Volume button or maximum
reached
Five rapid high tones Low battery
repeated every 60 sec.
No audio indications; Out of range
deteriorating audio
quality
Ring tone Incoming call
Single high tone Pairing confirmation
or End call
Single low tone Voice activation
Dual high/low tone Voice tag not
recognized
Low to high tone Phone network
not available