User guide

Advanced Features

English

Multi-Site Controls

These features are applicable when your current radio channel

is part of an IP Site Connect or Linked Capacity Plus

configuration.

NOTE: See IP Site Connect on page 10 and Linked Capacity

Plus on page 11 for more details about these

configurations.

Starting an Automatic Site Search

NOTE: The radio only scans for a new site if the current signal

is weak or when the radio is unable to detect any signal

from the current site. If the RSSI value is strong, the

radio remains on the current site.

Procedure:

1 Press the programmed Site Lock On/Off button.

2 A tone sounds.

3 The LED blinks yellow rapidly when the radio is actively

searching for a new site, and turns off once the radio locks

on to a site.

The radio also performs an automatic site search (site is

unlocked) during a PTT button press or data transmission if

the current channel, a multi-site channel with an attached roam

list, is out of range.

Stopping an Automatic Site Search

When the radio is actively searching for a new site:

Procedure:

1 Press the programmed Site Lock On/Off button.

2 A tone sounds and the LED turns off.

Starting a Manual Site Search

Procedure:

1 Press the programmed Manual Site Roam button.

2 A tone sounds and the LED blinks green.

3 You hear a positive indicator tone and the LED turns off,

indicating the radio is locked on to a site.

You hear a negative indicator tone and the LED turns off,

indicating the radio is unable to lock on to a site.

