User guide

Radio

Control

Steps

•

or to Radio

Number and press to

select.

• If there was previously

dialed ID, the ID appears

along with a blinking

cursor. Else, the first line

of the display shows

Radio Number:; the

second line of the display

shows a blinking cursor.

Use the keypad to edit/

enter the ID, and press

to select.

or to Remote Mon. and

press to select.

The display shows transitional mini notice,

indicating the request is in progress. The LED

lights up solid green.

2 Wait for acknowledgement.

If successful, a positive indicator tone sounds and

the display shows positive mini notice. Your radio

starts playing audio from the monitored radio for a

programmed duration and display shows Rem.

Monitor. Once the timer expires, the radio sounds

an alert tone and the LED turns off.

If unsuccessful, the radio sounds a negative

indicator tone the display shows negative mini

notice.

Stopping Remote Monitor

Remote Monitor automatically stops after a

programmed duration or when there is any user

operation on the target radio. Follow the steps below

to manually stop Remote Monitor.

1 Press the programmed Transmit Interrupt

Remote Dekey button.

Advanced Features in Non-Connect Plus Mode

English