Processor Users Manual

29-60 MPC8260 PowerQUICC II UserÕs Manual MOTOROLA
Part IV. Communications Processor Module
29.10.3 OAM Performance Monitoring Tables
The OAM performance monitoring tables include performance monitoring block test
parameters, as shown in Figure 29-37. Each block test needs a 32-byte performance
monitoring table in the dual-port RAM. In the connectionÕs RCT and TCT, the user
allocates an OAM performance table to a VCC or VPC. See Section 29.6.6, ÒPerformance
Monitoring.Ó PMT_BASE in the parameter RAM points to the base address of the tables.
The starting address of each PM table is given by PMT_BASE + RCT/TCT[PMT] ´ 32.
Table 29-28 describes Þelds in the performance monitoring table.
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Offset + 0x00 FMCE TSTE Ñ BLCKSIZE
Offset + 0x02 Ñ TX Cell Count (TCC)
Offset + 0x04 TUC1
Offset + 0x06 TUC0
Offset + 0x08 BEDC0+1-Tx
Offset + 0x0A BEDC0+1-RX
Offset + 0x0C TRCC1
Offset + 0x0E TRCC0
Offset + 0x10 Ñ SN-FMC
Offset + 0x12 Ñ
Offset + 0x14 PM CELL HEADER (VPI,VCI,PTI,CLP)
Offset + 0x16
Offset + 0x18 Ñ
Offset + 0x1A
Offset + 0x1C
Offset + 0x1E
Figure 29-37. OAM Performance Monitoring Table