User`s guide

MPC8240 and MPC8260 Emulation 109

Chapter 8: Updating Firmware

Emulation Probe Firmware

To display current firmware version

information

• Use telnet or a terminal emulator to access the built-in

"terminal interface" and use the ver command to view the

version information for firmware currently in the emulation

probe.

To update firmware for an emulation probe

To update the firmware, you must have access to the World Wide Web

and a PC or a workstation connected to your emulation probe.

1 Download the new firmware from the following World Wide Web

site:

http://www.agilent.com/find/emulator

The firmware will be in the “Technical Support Information” section of

this web site.

2 Follow the instructions on the web site for installing the

firmware.

If Agilent Technologies sends you firmware on a floppy disk, install the

firmware from the floppy disk. The README file on the floppy disk

contains instructions for installing the firmware using a PC or

workstation.