User`s guide

112 MPC8240 and MPC8260 Emulation
Chapter 8: Updating Firmware
Emulation Module Firmware
To update firmware for an emulation module
using the Setup Assistant
The Setup Assistant is an online tool for connecting and configuring
your logic analysis system for microprocessor and bus analysis. The
Setup Assistant is available on the Agilent Technologies 16600A and
16700A-series logic analysis systems.
This menu-driven tool will guide you through the connection
procedures for connecting the logic analyzer to an analysis probe, an
emulation module, or other supported equipment. It will also guide you
through connecting an analysis probe to the target system.
Do not use the Setup Assistant to connect an emulation probe if you
already have an emulation module installed.
1
Install the processor support package from the CD-ROM.
2
Start the Setup Assistant by clicking its icon in the system
window.
3
Follow the instructions displayed by the Setup Assistant.
See also Page page 52 for instructions on how to install a the processor
support package from the CD-ROM.