User`s guide

130 MPC8240 and MPC8260 Emulation
Chapter 10: Troubleshooting the Emulator
Problems with the Target System
If any of these commands don’t work, there may be a problem with the
design of your target system, a problem with the revision of the
processor you are using, or a problem with the configuration of the
emulation module.
2
Check that the emulation module firmware matches your
processor. To do this, enter:
M>ver
To check the debug port connector signals
•
Check for the following logic levels on the target debug port. The
signal names are for the MPC8200.
Levels with the emulation module not connected: