User`s guide

MPC8240 and MPC8260 Emulation 139
Chapter 10: Troubleshooting the Emulator
Problems with the LAN Interface (Emulation Module Only)
Problems with the LAN Interface (Emulation
Module Only)
If LAN communication does not work
If you cannot verify the connection, or if the commands are not
accepted by the emulation module:
❏
Make sure that you wait for the power-on self test to complete before
connecting.
❏
Make sure that the LAN cable is connected. Watch the LAN LED’s on the
back of the logic analysis system to see whether the system is seeing LAN
activity. Refer to your LAN documentation for testing connectivity.
❏
Check that the host computer or debugger was configured with the correct
LAN address. If the logic analysis system is on a different subnet than the
host computer, check that the gateway address is correct.
❏
Make sure that the logic analysis system’s IP address is set up correctly.
❏
Refer to the online help in the logic analysis system for more information.