User`s guide

162 MPC8240 and MPC8260 Emulation
Glossary
corresponding odd and even logic
analyzer pod cables.
High-Density Termination
Adapter Cable Same as a High-
Density Adapter Cable, except it has
a termination in the Mictor
connector.
Jumper Moveable direct electrical
connection between two points.
Mainframe Logic Analyzer A logic
analyzer that resides on one or more
board assemblies installed in an
Agilent Technologies 16500, 1660-
series, or 16600A/700A-series
mainframe.
Male-to-male Header A board
assembly that makes point-to-point
connections between the female pins
of a flexible adapter or transition
board and the female pins of an
analysis probe.
Preprocessor See Analysis Probe.
Preprocessor Interface See
Analysis Probe.
Probe adapter See Elastomeric
Probe Adapter.
Processor Probe See Emulation
Probe.
Prototype Analyzer The Agilent
Technologies 16505A prototype
analyzer acts as an analysis and
display processor for the Agilent
Technologies 16500B/C logic analysis
system. It provides a windowed
interface and powerful analysis
capabilities. Replaced by Agilent
Technologies 16600A/700A-series
logic analysis systems.
Run Control Probe See Emulation
Probe and Emulation Module.
Setup Assistant A software
program that guides a user through
the process of connecting and
configuring a logic analyzer to make
measurements on a specific
microcontroller.
Shunt Connector. See Jumper.
Software Probe See Emulation
Probe.
Solution Agilent Technologies’ term
for a set of tools for debugging your
target system. A solution includes
probing, inverse assembly, the
Agilent Technologies B4620B Source
Correlation Tool Set, and an
emulation module.
Stand-alone Logic Analyzer A
standalone logic analyzer has a
predefined set of hardware