User`s guide

20 MPC8240 and MPC8260 Emulation
Chapter 1: Overview
Emulation Probe
To power on the system
With all components connected, power on your system as follows:
1
Logic analyzer, if you are using one.
2
Emulation probe.
3
Your target system.
To power off the system
Power off your system as follows:
1
Your target system.
2
Emulation probe.
3
Logic analyzer, if you are using one.
Connection Sequence
Disconnect power from the target system, emulation probe, and logic
analyzer before you make or break connections.
1
Connect the emulation probe to a LAN (page 28).
2
Connect the emulation probe to your target system (page
57).
3
Configure the emulation probe (page 70).