User`s guide

22 MPC8240 and MPC8260 Emulation
Chapter 1: Overview
Emulation Module
Equipment Supplied with the Emulation Module
Minimum equipment required
The following equipment is required to use the emulation module:
A method for connecting to the target system. The Agilent
Technologies analysis probe provides a debug port connector.
You can also design a debug port connector on the target
system (see “Designing a MPC8240 or MPC8260 Target
System” on page 63).
• An Agilent Technologies 16600A or 16700A logic analysis system.
• A user interface, such as a high-level source debugger or the logic analysis
system’s Emulation Control Interface.