User`s guide

24 MPC8240 and MPC8260 Emulation
Chapter 1: Overview
Minimum equipment required
Minimum equipment required
The following equipment is required to use the emulation migration:
• An emulation module or emulation probe.
• A 50-pin data cable (supplied with the emulation module or probe).
• A method for connecting to the target system. An Agilent Technologies
analysis probe provides a debug port connector. You can also design a
debug port connector on the target system.
• A host computer such as a PC, a workstation, or an Agilent Technologies
16600A or 16700A logic analysis system.
• A user interface, such as a high-level source debugger or the logic analysis
system's Emulation Control Interface.