User`s guide

MPC8240 and MPC8260 Emulation 31
Chapter 2: Connecting the Emulation Probe to a LAN
3 Write down the link-level address of the emulation probe.
You will need this address if you use BOOTP to set the IP
address.
The link-level address (LLA) is printed on a label above the LAN
connectors on the emulation probe. This address is configured
in each emulation probe shipped from the factory and cannot
be changed.
IP Address of Emulation probe __________________________
LAN Name of Emulation Probe __________________________
Gateway Address __________________________
Link-Level Address of Emulation Probe
__________________________