User`s guide

MPC8240 and MPC8260 Emulation 47
Chapter 3: Installing the Emulation Module
To install the emulation module in a 16700A-
series logic analysis system or a 16701A
expansion frame
You will need T-10 and T-15 Torx screw drivers.
1
Turn off the logic analysis system and REMOVE THE POWER
CORD.
Remove any other cables (including mouse or video monitor cables).
2
Turn the logic analysis system frame upside-down.
3
Remove the bottom cover.
4
Remove the slot cover.
You may use either slot.