User`s guide

52 MPC8240 and MPC8260 Emulation
Chapter 4: Installing Software on a 16600A/700A
This chapter explains how to install the software you will need for your
analysis probe or emulation solution.
Installing and loading
Installing
the software will copy the files to the hard disk of your logic
analysis system. Later, you will need to
load
some of the files into the
appropriate hardware module.
What needs to be installed
Agilent Technologies 16600A/700A-series logic analysis
systems
If you ordered an emulation solution with your logic analysis system,
the software was installed at the factory.
The following files are installed when you install a processor support
package from the CD-ROM:
• Logic analysis system configuration files
• Inverse assembler (automatically loaded with the configuration files)
• Personality files for the Setup Assistant
• Emulation module firmware (for emulation solutions)
• Emulation Control Interface (for emulation solutions)
The Agilent Technologies B4620B Source Correlation Tool Set is
installed with the logic analysis system’s operating system.
CD-ROM or
flexible disk
Logic analyzer
or emulation
module
Hard Disk
Logic analysis system or logic analyzer frame
Install
Load