User`s guide

6
Contents
2 Connecting the Emulation Probe to a LAN
Setting Up a LAN Connection to a PC or Workstation 29
To obtain an IP address 30
To configure LAN parameters using the built-in terminal interface 32
To configure LAN parameters using BOOTP 35
To set the 10BASE-T configuration switches 38
To verify LAN communications 39
Setting Up a Serial Connection 40
To set the serial configuration switches 41
To connect a serial cable 42
To verify serial communications 44
3 Installing the Emulation Module
To install the emulation module in a 16700A-series logic analysis system or a
16701A expansion frame 47
To install the emulation module in a 16600A-series logic analysis system 49
4 Installing Software on a 16600A/700A
Installing and loading 52
What needs to be installed 52
To install the software from CD-ROM (16600A/700A) 53
To list software packages which are installed (16600A/700A) 54
5 Connecting and Configuring the Emulator
Using the Emulation Control Interface 59
To start the Emulation Control Interface from the main System window (emu-
lation module) 60
To start the Emulation Control Interface from the Workspace window (emula-
tion module) 61
To start the Emulation Control Interface from the Workspace window for an