User`s guide

8
Contents
6 Using the Emulator with a Debugger
Setting Up Debugger Software 87
To connect the logic analysis system to the LAN 88
To change the port number of an emulation module 89
To verify communication with the emulator 90
To export the logic analysis system’s display to a workstation 91
To export the logic analysis system’s display to a PC 92
7 Using the Analysis Probe and Emulation Module Together
What are some of the tools I can use? 94
Which assembly-level listing should I use? 94
Which source-level listing should I use? 95
Where can I find practical examples of measurements? 95
Triggering the Emulation Module from the Analyzer 96
To stop the processor when the logic analyzer triggers on a line of source code
(Source Viewer window) 96
To stop the processor when the logic analyzer triggers (Intermodule
window) 97
To minimize the “skid” effect 98
To stop the analyzer and view a measurement 99
Tracing Until the Processor Halts 100
To capture a trace before the processor halts 100
Triggering the Logic Analyzer from the Emulation Module 101
The emulation module trigger signal 101
Group Run 102
To trigger the analyzer when the processor halts 104
To trigger the analyzer when the processor reaches a breakpoint 105