User`s guide

MPC8240 and MPC8260 Emulation 81
Chapter 5: Connecting and Configuring the Emulator
Testing the emulator and target system
Testing the emulator and target system
After you have connected and configured the emulator, you should
perform some simple tests to verify that everything is working.
See Also Chapter 10, “Troubleshooting the Emulator,” beginning on
page 120, for information on testing the emulator hardware.
To test memory accesses
1
Start the Emulation Control Interface and configure the emulator
and target memory system.
2
Open the Memory window.
3
Write individual locations or fill blocks of memory with patterns
of your choosing.
The access size is the size of memory access that will be used to write
or read the memory values.
4
Use the Memory I/O window to stimulate I/O locations by reading
and writing individual memory locations.