User`s guide

90 MPC8240 and MPC8260 Emulation

Chapter 6: Using the Emulator with a Debugger

Setting Up Debugger Software

To verify communication with the emulator

1 Telnet to the IP address.

For example, on a UNIX system, enter “telnet <

IP_address> 6472”.

This connection will give you access to the emulator’s built-in terminal

interface. You should see a prompt, such as “M>”.

At the prompt, type:

ver

You should then see information about the emulator and firmware

version.

To exit from this telnet session, type

<CTRL>D

at the prompt.

See Also The online help or manual for your logic analysis system, for

information on physically connecting the system to the LAN and

configuring LAN parameters.