Cell Phone Owner's Manual

116 - Internet, Entertainment, and More
5. Connect your Smartphone to the device with which you want to use your Smart-
phone as a modem.
To set up a serial port modem connection
1. Make sure that your Smartphone is not connected to another device.
2. On the Home screen, press the Programs soft key, select More, select Accesso-
ries, and then press the Action button.
3. Select Modem Link, and then press the Action button.
4. Under Connection, select Serial (COM1),presstheMenu soft key, select
Activate ,
and then press the Action button.
Note: The default baud rate is set for 115,200. Do not change this default unless the
port speed of the Smartphone or computer requires you to do so.
To activate the Modem Link
1. On the Home screen, press the Programs soft key, select More, select Accesso-
ries, and then press the Action button.
2. Select Modem Link, and then press the Action button.
3. Press the Menu soft key, select Activate, and then press the Action button.
4. Align the Smartphone's infrared (IR) port or connect the cable to the device.
To deactivate the Modem Link
1. On the Home screen, press the Programs soft key, select More, select Accesso-
ries, and then press the Action button.
2. Select Modem Link, and then press the Action button.
3. Press the
Menu soft key, select Deactivate, and then press the Action button.
Note: Failing to deactivate the Modem Link when you are finished using it may result in
problems with using ActiveSync in the same session.