User Manual

connects wirelessly to the MT7711, it may show the Wireless Network

Name/SSID and Password. You can also find this information through the

MT7711’s Configuration Manager. Information about doing this is in the

Configuration Manager section above.

If all else fails, reset the device to factory defaults by holding the Reset

button for 10 seconds. You can then use the default values.

What if I think that wireless devices are interfering with

my MT7711 wireless router?

1. Where possible, put the MT7711 as far away as possible from interfering

devices such as Bluetooth transmitters and neighbors’ WiFi routers.

2. To try to pick a less used wireless channel for your MT7711, first go in to

your MT7711’s Configuration Manager.

• Then, click the Advanced button at the top of the page, then click the

Wireless and Scan/Bridge menu items at the top of the page.

• Click the ScanWirelessAPs button. A list will appear of competing

wireless networks, including the channels they are using. Write down

one or more of the less used channel numbers, since a less used

channel should be better for your MT7711.

• On the top of the page, click the Wireless Basic menu item.

• On the Basic page, select the channel you want in the Channel

pulldown, then click Save.

Do you have any other questions? We have more information at