User guide

111
Messages
1. From the main menu, select Messages > Predefined. The
first template in the predefined template list is displayed
(if no predefined template exist, the message
No Predefined will be displayed).
2. Scroll through the list and select the required template.
Press
to enter the Predefined Menu and select one of
the following options:
• View
• Edit. (In the example, a registration mes-
sage is displayed).
Editing a Predefined Template
Check with your Service Provider for the
types of predefined templates in your
terminal.
There are three types of predefined templates:
• Alphanumeric—enter characters and digits
• Numeric—enter digits
• Mixed—enter digits, *, and #.
The cursor is located before the first character. To move the
cursor forward, scroll right. The editor functions in overwrite
mode.
After editing a template, you can send it.
Sending a Predefined Template
1. Press Send, PTT o
r *, or the relevant one-touch nu-
meric key to send the message.
2. The display will show one of the following delivery reports:
*
Message Delivered — to indicate that the message
was successfully sent and received.
*
Message Failed — the message was not received.
A predefined message address is also defined by your Service Provider dur-
ing programming and cannot be changed.
M
E
N
U
Register
ABC 27|
Send Delete
6802972C35.book Page 111 Monday, August 16, 2004 9:22 PM