User guide

52
Other Ways of Dialing
Dialing via the Contact List
You can also use the contact list to select a number you previously
stored. Press Contcs and search the stored number by scrolling
( or ) or by entering the first character of the contact name. If
the contact has more than one number, use / to select the
number.
If the contact has more than one number stored, pickers surround
the contact icon
. Use / to select the number.
Speed Dial
Speed dial allows you to dial a shortened number of up to
three digits instead of the full number. The speed dial number
is the location of an entry in the contact list.
1. Enter the pre-programmed speed dial number (for exam-
ple: 5) and press .
2. To place the call, press .
3. To hang up, press .
One-touch Dial
One-touch dialing allows you to place a call by pressing and
holding one of the numeric keys (0-9) or side keys. The
number is the location of an entry (0-9) in the contact list.
1. Press and hold the required numeric key for a few sec
onds. Your MTH800 will display the number and dial it.
2. To hang up, press .
If no name is stored under a letter, the MTH800 searches forward, alpha-
betically, until the next name is found. If more than one name in the list
begins with the same letter, scroll to view other names.
If dialing via one-touch numeric key is enabled, one-touch dial is
disabled (see page 20).
6802972C35.book Page 52 Monday, August 16, 2004 9:22 PM