User guide

48
English
RADIO CALLS
(TRUNKED
OPERATION ONLY)
Note: The programming-mode annunciator,
K, blinks while program mode is
active.
In the edit mode, the , keyfunctionsasa
backspace key. Pressing it will erase the
previous digit, and the cursor will move to the
left. When the last digit on the display has
been erased, additional presses of this key or
the / key will cause you to leave the edit
mode without making any changes.
You can only enter a maximum of 16 digits in
any entry for the telephone list. When this
maximum is reached, the cursor will disappear.
If you try to add any more digits, you will hear
an invalid (bad) keypress alert tone.
Programming the Call List
This feature allows you to use the radio’s
keypad to change the radio ID numbers
assigned to the call list used by the trunked
Private Conversation and Call Alert features.
To change the call list radio ID numbers
10 When you have finished changing the tele-
phone number, press the select key again.
The change is saved in the radio’s memory.
11 You are returned to step
5. The display will again
alternate between
showing the member’s
name and telephone
number. You can now
change additional
numbers.
Alternates between:
and
12 When you have finished making changes,
press . to exit program mode.
13 The radio will return to
thehomedisplay.
POLICE DEPT
5556445
PLANT POLICE
1 / until PROG is
displayed.
2 l (the softkey below
PROG).
3 l (the softkey below
CALL). The display
shows the first
programmable member
of the call list.
DIR PHON PROG
SCAN PHON CALL
SK TAN