Laptop User Manual

Using the 166Bug Debugger
4-4 MVME166 Single Board Computer Installation Guide
4
Valid expression examples:
The total value of the expression must be between 0 and $FFFFFFFF.
Address as a Parameter
Many commands use ADDR as a parameter. The syntax accepted by 166Bug
is similar to the one accepted by the MC68040 one-line assembler. All control
addressing modes are allowed. An "address + offset register" mode is also
provided.
Address Formats
Table 4-1 summarizes the address formats which are acceptable for address
parameters in debugger command lines.
Expression Result (In Hex) Notes
FF0011 FF0011
45+99 DE
&45+&99 90
@35+@67+@10 5C
%10011110+%1001 A7
88<<4 880 shift left
AA&F0 A0 logical AND