User`s manual

t167 Test Program
E-4 Single Board Computers SCSI Software UserÕs Manual
E
SCSI Driver Library Development Tools
This submenu provides access to a number of functions which are useful when
working with the SDL. From this menu, a user may build and issue SDL
commands. Once a command has been executed by the SDL, other menu
selections permit the user to inspect the results returned by the SDL.
NCR Firmware Development Tools
This submenu provides access to the SIOP Firmware. From this menu, a user
may build and issue SIOP commands. Once a command has been executed by
the SIOP Firmware, other menu selections permit the user to inspect the
results returned by the SIOP Firmware.
SCSI Driver Library Tests
This menu item does not perform any useful action.
NCR Firmware Tests
This menu item does not perform any useful action.
help
This selection simply causes the current menu to be redisplayed.
status
The command line for the previous command is displayed, along with the
status returned when that command was completed.
quit
From a submenu, this selection returns control to the next higher level. From
the main menu, this selection causes t167 to terminate.
exit
From any menu, this selection causes t167 to terminate. This item and quit in
the main menu are redundant; both are included to maintain consistency with
all other menus.
t167 Configuration Menu
The selections within this submenu permit a user to alter certain parameters
used throughout t167. Although the design of t167 is configured to useful
default parameters at run-time, it may sometimes be useful to change one or
more of the configurable values, particularly when doing development work.