User`s manual

Menu Item Descriptions

SBCSCSI/D1 E-7

SCSI Driver Library Development Tools Menu

This submenu provides access to a number of functions which are useful when

working with the SDL. From this menu, a user may build and issue SDL

commands. Once a command has been executed by the SDL, other menu

selections permit the user to inspect the results returned by the SDL.

Note

Certain commands require data space, in the form of a

buffer and/or configuration control structure. If needed,

each command queries the user to determine which buffer

or control structure is to be used. This permits a sequence

of commands to be executed repeatedly without the need to

reconfigure before each.

Commands which query for specific data values list acceptable values in

square brackets and existing values in ellipses. Existing values may be

selected by responding with a carriage return. If an unacceptable response is

detected, the prompt is reissued. If a '.' is entered at a parameter prompt, any

new information is retained and all other data left intact. An 'x' at a parameter

prompt results in termination of t167.

Item Name Description

1 bldsdlcs Build sdl_cmd structure

2 sdlinit Issue sdl_init command

3 sdlread Issue sdl_read command

4 sdlwrite Issue sdl_write command

5 sdlcntrl Issue sdl_cntrl command

6 dspsdlcs Display sdl_cmd structure

7 dspdb Display data buffer contents

8 testsn Display/set test serial number

9 reset Reset SCSI bus

h help Display this menu

s status Status of previous command

q quit Return to previous menu

x exit Exit from t167