User`s manual

t167 Test Program
E-20 Single Board Computers SCSI Software UserÕs Manual
E
SDL Tools --> 5
Control structure [0] (0):
sdl_cntrl status: 0x0
SDL Tools -->
A status of 0 indicates a good ATTACH.
Add a Second Data Buffer to the t167 Configuration
In order to issue an SDL INQIRY command to the device, t167 must have a
second data buffer allocated of length less than the 0xff byte maximum
allowed by the SCSI-2 when issuing an INQUIRY to a device. This procedure
demonstrates the creating of such a buffer.
1. From the current menu, enter a q command to go back one menu level to
the t167 entry menu.
SCSI Driver Library Development Tools
Item Name Description
---- ------ ---------------------
1 bldsdlcs Build sdl_cmd structure
2 sdlinit Issue sdl_init command
3 sdlread Issue sdl_read command
4 sdlwrite Issue sdl_write command
5 sdlcntrl Issue sdl_cntrl command
6 dspsdlcs Display sdl_cmd structure
7 dspdb Display data buffer contents
8 testsn Display/set test serial number
9 reset Reset SCSI bus
h help Display this menu
s status Status of previous command
q quit Return to previous menu
x exit Exit from t167
SDL Tools -->
q
2. At the top menu, select item 1 to conÞgure t167.
SCSI Test and Development Utility
Item Name Description
---- ------ ---------------------
1 cnfg t167 Configuration
2 sdldt SCSI Driver Library Development Tools
3 fwdt NCR Firmware Development Tools
4 sdltst SCSI Driver Library Tests
5 fwtst NCR Firmware Tests
h help Display this menu
s status Status of previous command
q quit Exit from t167
x exit Exit from t167
t167 -->
1