User`s manual

Example Use of t167

SBCSCSI/D1 E-23

3. Select menu item 7 to display the data buffer holding the INQIRY data:

SCSI Driver Library Development Tools

Item Name Description

---- ------ ---------------------

1 bldsdlcs Build sdl_cmd structure

2 sdlinit Issue sdl_init command

3 sdlread Issue sdl_read command

4 sdlwrite Issue sdl_write command

5 sdlcntrl Issue sdl_cntrl command

6 dspsdlcs Display sdl_cmd structure

7 dspdb Display data buffer contents

8 testsn Display/set test serial number

9 reset Reset SCSI bus

h help Display this menu

s status Status of previous command

q quit Return to previous menu

x exit Exit from t167

SDL Tools --> 7

Data buffer [0 - 1] (1):

Offset into buffer (0):

Number of bytes to display (64, 0x40):

db[0]: First address = 0x1fbdca0 Last address = 0x1fbe09f

0 00 00 01 01 1F 00 00 00 48 50 20 20 20 20 20 20 ........HP

10 39 37 35 34 38 53 20 20 20 20 20 20 20 20 20 20 97548S

20 38 39 31 36 00 00 00 00 00 00 00 00 00 00 00 00 8916............

30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

SDL Tools -->

Issue a Format Command

The format command FORMAT allows a user to format a device. If the user

is unsure of the current format of the device, it is advisable to issue this

command. Generally, this command can take a while to complete.

Caution

The Format command erases any data on a disk.