User`s manual

Example Use of t167
SBCSCSI/D1 E-25
E
1. Use the q command to go from the current menu to the main t167 menu
and select menu item 1, t167 cnfg.
2. In the cnfg menu, select item 3 to display the current data buffer
parameters. Use this function to get the address and size of data buffer 0.
t167 Configuration
Item Name Description
---- ------ ---------------------
1 newcs Allocate new control structure set
2 newdb Allocate new data buffer
3 dbp Display/alter data buffer parameters
4 addr SDL and NCR firmware addresses
5 term Select terminal type
h help Display this menu
s status Status of previous command
q quit Return to previous menu
x exit Exit from t167
t167 Config --> 3
Statistics for allocated data buffers:
Buffer First Address End Address Length
0 0x1FBDCA0 0x1FBE09F 1024, (0x400)
1 0x1FB9CA0 0x1FB9CDF 64, (0x40)
t167 Config -->
3. Hit the ABORT switch on the front panel of the target CPU and use the
memory modify (MM) command to Þll in the contents of data buffer 0.
t167 -->
Exception: Interrupt Level 7 (ABORT Switch)
Vector Number =1, Address =008
SXIP =0001A1E4 SNIP =0001A1E2 TPSR =800003F0
IP =0001A1E0 CR02 =800003F0 CR07 =0005D000 R00 =00000000
R01 =DEADDEAD R02 =00000000 R03 =00000000 R04 =00010000
R05 =01F76000 R06 =00000000 R07 =00000000 R08 =00000000
R09 =00000000 R10 =00000000 R11 =00000000 R12 =00000000
R13 =00000000 R14 =00000000 R15 =00000000 R16 =00000000
R17 =00000000 R18 =00000000 R19 =00000000 R20 =00000000
R21 =00000000 R22 =00000000 R23 =00000000 R24 =00000000
R25 =00000000 R26 =00000000 R27 =00000000 R28 =00000000
R29 =00000000 R30 =00000000 R31 =01FFEDA0
0001A1E0 C0000000 BR $0001A1E0
187-Bug>md 1fbdca0:10
01FBDCA0 00000000 00000000 00000000 00000000 ................
01FBDCB0 00000000 00000000 00000000 00000000 ................
01FBDCC0 00000000 00000000 00000000 00000000 ................
01FBDCD0 00000000 00000000 00000000 00000000 ................
187-Bug>bf 1fbdca0 1fbdca0+400 'DADA'