User`s manual

t167 Test Program
E-30 Single Board Computers SCSI Software UserÕs Manual
E
UCHAR msg_out[6] ................ (0):
UCHAR msg_out[7] ................ (0):
UCHAR msg_out[8] ................ (0):
UCHAR msg_out[9] ................ (0):
UCHAR msg_out[10] ................ (0):
UCHAR msg_out[11] ................ (0):
UINT data_count ................... (1024):
UCHAR *data_ptr ................... (0x1FBDCA0):
struct siop_struc *link_ptr ....... (0):
UCHAR scsi_phase[0] ............. (0):
UCHAR scsi_phase[1] ............. (0):
UCHAR scsi_phase[2] ............. (0):
UCHAR scsi_phase[3] ............. (0):
UCHAR scsi_phase[4] ............. (0):
UCHAR scsi_phase[5] ............. (0):
UCHAR scsi_phase[6] ............. (0):
UCHAR scsi_phase[7] ............. (0):
void (*status_ptr)() .............. (0x1FD1A70):
F/W Tools -->
2. Select menu item 5 to display a portion of the command structure.
F/W Tools --> 5
Control structure [0] (0):
Address of siop_struc structure: 0x1FBCCB4
Contents of siop_struc structure:
UINT user_defined ................ 0x0
UINT cmd_ctrl ..................... 0x8000000D
UINT addr_ilvl .................... 0, 0x0
UINT lun .......................... 0, 0x0
UINT cdb_lgth ..................... 6, 0x6
UCHAR cdb[MAX_CDB]:
0 12 00 00 00 40 00 00 00 00 00 00 00 ....@.......
UINT msg_in_lgth .................. 12, 0xC
UCHAR *msg_in_ptr ................. 0x1FBCCDC
UCHAR msg_in[MAX_MSG_IN]:
0 00 00 00 00 00 00 00 00 00 00 00 00 ............
UINT msg_out_lgth ................. 12, 0xC
UCHAR *msg_out_ptr ................ 0x1FBCCF0
UCHAR msg_out[MAX_MSG_OUT]:
0 00 00 00 00 00 00 00 00 00 00 00 00 ............
UINT data_count ................... 1024, 0x400
UCHAR *data_ptr ................... 0x1FBDCA0
struct siop_struc *link_ptr ....... 0x0
<CR> for more, 'q' or '.' to quit, 'x' to exit: .
F/W Tools -->