User`s manual

t167 Test Program
E-34 Single Board Computers SCSI Software UserÕs Manual
E
Issue a Read Command to the Device
1. Hit the ABORT switch on the front panel of the target CPU and use the
memory modify (MM) command to fill in the contents of data buffer 0.
F/W Tools -->
Exception: Interrupt Level 7 (ABORT Switch)
Vector Number =1, Address =008
SXIP =0001A1E4 SNIP =0001A1E2 TPSR =800003F0
IP =0001A1E0 CR02 =800003F0 CR07 =0005D000 R00 =00000000
R01 =DEADDEAD R02 =00000000 R03 =00000000 R04 =00010000
R05 =01F76000 R06 =00000000 R07 =00000000 R08 =00000000
R09 =00000000 R10 =00000000 R11 =00000000 R12 =00000000
R13 =00000000 R14 =00000000 R15 =00000000 R16 =00000000
R17 =00000000 R18 =00000000 R19 =00000000 R20 =00000000
R21 =00000000 R22 =00000000 R23 =00000000 R24 =00000000
R25 =00000000 R26 =00000000 R27 =00000000 R28 =00000000
R29 =00000000 R30 =00000000 R31 =01FFEDA0
0001A1E0 C0000000 BR $0001A1E0
187-Bug>bf 1fbdca0 1fbdca0+400 0
Effective address: 01FBDCA0
Effective address: 01FBE09F
187-Bug>md 1fbdca0:10
01FBDCA0 00000000 00000000 00000000 00000000 ................
01FBDCB0 00000000 00000000 00000000 00000000 ................
01FBDCC0 00000000 00000000 00000000 00000000 ................
01FBDCD0 00000000 00000000 00000000 00000000 ................
187-Bug>
2. Issue the go (G) command to the MVME167/187 ROM Debugger and hit
an h to repaint the t167 screen.