User`s manual

IN-7
I
N
D
E
X
SCSI SCRIPTS data reference relocation
4-1
SCSI software
general description 1-4
SCSI status GL-2
SCSI-2 1-4, GL-2
SCSIRST (command control bit 8) B-7
SDL GL-2
SDL and NCR firmware addresses E-6
SDL direct access commands E-11
SDL supported sequential access com-
mands E-12
sdl_key D-1
sdt_alloc 2-2, 3-10, 5-1
sdt_tinit 2-2, 3-8, 5-1
debug logging initialization struc-
ture B-23
select GL-2
select terminal type E-6
send SCSI INQUIRY to the device E-29
sense_key D-1
serialize_memory_access C-5
sfw_getrev 2-2, 3-11
SGE 5-14
SI_ABRT (0x04) D-4
SI_ABRTTAG (0x05) D-5
SI_BADCLKPAR (0x0A) 3-4, D-6
SI_BADPARAM (0x21) 3-4, D-10
SI_BADPATCH (0x1E) 3-4, D-10
SI_BADQDEPTH (0x0B) D-6
SI_BERR (0x0E) D-6
SI_BERRCMD (0x0F) D-7
SI_BUSHUNG (0x13) D-8
SI_CLEARQ (0x06) D-5
SI_CLK2FAST (0x09) 3-4, D-6
SI_DATAOV (0x07) D-5
SI_DATAUR (0x08) D-5
SI_DEVRST (0x03) D-4
SI_GOOD (0x00) 3-4, D-4
SI_ILGLINST (0x10) D-7
SI_NOP (0x01) D-4
SI_NOSCSIBUS (0x1F) 3-4, D-10
SI_PVE01 (0x14) D-8
SI_PVE02 (0x15) D-8
SI_PVE03 (0x16) D-8
SI_PVE04 (0x17) D-8
SI_PVE05 (0x18) D-9
SI_PVE06 (0x19) D-9
SI_PVE07 (0x1A) D-9
SI_PVE09 (0x1C) D-9
SI_PVE0A (0x1D) D-9
SI_RESELTO (0x0D) D-6
SI_SCSIRST (0x02) D-4
SI_SELTO (0x0C) D-6
SI_UDC (0x11) D-7
SI_UPC (0x12) D-8
SIID 5-14
SIOP 1-4, 2-1, GL-2
SIOP clock rates for VMEmodules B-19
SIOP firmware 1-5
basic view 2-1
SIOP firmware structures B-1
siop_cmd 2-2, 3-6
siop_init 2-2, 3-3, B-18
siop_init()
error conditions 3-4
siop_int 2-2, 3-7
siop_key D-1
siop_key error codes D-4
siop_struc B-1, D-1
siop_struc (command structure) B-1
SIOPADD (command control bit 10) B-7
SIOPINT (command control bit 9) B-7
snoop control modes B-19
source files A-1
special topics 5-1
splhi C-2
splx C-3
SS_BUSY (0x08) D-2
SS_CHECK (0x02) D-1
SS_CM_GOOD (0x04) D-2
SS_CMDTERM (0x22) D-3
SS_GOOD (0x00) D-1
SS_I_CM_GOOD (0x14) D-2