User`s manual

SBCSCSI/D1A-1
A
DIRECTORY STRUCTURE
Miscellaneous files used for the SCSI Software for the compiler and
preprocessor binaries are mentioned in Chapter 4. These files are located
under bin. Other unsupported files are located under src and lib. See Figure
A-1.
The SCSI Software is mostly organized under a single directory, sbc_scsi.
Under this directory are two main subdirectories for the include files and the
SIOP Firmware. See Figure A-2.
These two subdirectories are:
incl/ Contains the SCSI Software-specific include files.
ncr710/ Contains the source files for the SIOP Firmware.
The other subdirectory under sbc_scsi is sdl, which itself has various
subdirectories with several files. See Figure A-3.
All of this directory structure is depicted on the following pages. Note that not
all of the files are supported. Many are for example purposes only and are
released as unsupported software. Refer to the SBC SCSI Software Release 1.1
Software Release Guide, as listed in the Related Documentation section of Chapter
1, for more information.