User`s manual

Overview E-1
Menu Item Descriptions E-3
Main Menu E-3
t167 Configuration E-3
SCSI Driver Library Development Tools E-4
NCR Firmware Development Tools E-4
SCSI Driver Library Tests E-4
NCR Firmware Tests E-4
help E-4
status E-4
quit E-4
exit E-4
t167 ConÞguration Menu E-4
Allocate New Control Structure Set E-5
Allocate New Data Buffer E-5
Display/Alter Data Buffer Parameters E-5
SDL and NCR Firmware Addresses E-6
Select Terminal Type E-6
SCSI Driver Library Development Tools Menu E-7
Build sdl_cmd Structure E-8
Issue sdl_init Command E-8
Issue sdl_read Command E-8
Issue sdl_write Command E-9
Issue sdl_cntrl Command E-9
Display sdl_cmd Structure E-9
Display Data Buffer Contents E-10
Display/Set Test Serial Number E-10
Reset SCSI Bus E-10
NCR Firmware Development Tools Menu E-13
Build F/W Control Structure E-14
Issue siop_init Command E-14
Issue siop_cmd Command E-14
Display Command Descriptor Block E-14
Display F/W Firmware Control Structure E-14
Display F/W Status E-14
Display Data Buffer Contents E-14
Reset SCSI Bus E-15
Menu Expansion E-16
Adding SDL Tools Support for New Devices E-16
Example Use of t167 E-18
Use of t167 with the SDL E-18