Personal Computer User Manual

Using the 197Bug Debugger
4-12 Installation Guide
4
Table 4-1. Debugger Commands (Continued)
Command
Mnemonic
Command
Title
Command Line
Syntax
NAB
NBH
NBO
NIOC
NIOP
NIOT
NPING
OF
PA
NOPA
PF
NOPF
PFLASH
PS
RB
NORB
RD
REMOTE
RESET
Automatic Network
Boot Operating
System
Network Boot
Operating System
and Halt
Network Boot
Operating System
Network I/O
Control
Network I/O
Physical
Network I/O Teach
Network Ping
Offset Registers
Display/Modify
Printer Attach
Printer Detach
Port Format
Port Format/Detach
Program FLASH
Memory
Put RTC Into Power
Save Mode for
Storage
ROMboot Enable
ROMboot Disable
Register Display
Connect the Remote
Modem to CSO
Cold/Warm Reset
NAB
NBH [Controller LUN] [Device LUN] [Client IP Address]
[Server IP Address] [String]
NBO [Controller LUN] [Device LUN] [Client IP Address]
[Server IP Address] [String]
NIOC
NIOP
NIOT [;[H]|[A]]
NPING Controller-LUN Device-LUN Source-IP
Destination-IP[N-Packets]
OF [ Zn[;A] ]
PA [n]
NOPA [n]
PF [PORT]
NOPF [PORT]
PFLASH SSADDR SEADDR DSADDR [IEADDR]
[;[A|R] [X]]
PFLASH SSADDR:COUNT DSADDR [IEADDR]
[;[B|H|W] [A|R] [X]]
PS
RB[;V]
NORB
RD {[+|-|=][DNAME][/]} {[+|-|=][REG1[-REG2]][/]}
REMOTE
RESET