Technical data

IN-1
Index
Numerics
177Bug
disk/tape controller data D-1
firmware 3-8
implementation 3-3
network controller data C-1
overview 3-1
stack space 3-4
27D4002 EPROM 3-3
53C710 SCSI controller 4-11
82596CA LAN coprocessor 4-11
A
abort process 2-12
ABORT switch 4-14
aborting program execution 2-1
address/data configurations 1-14
addressing modes 1-13
altitude (operating) A-1
ambient air temperature (effect on cooling)
A-2
arbitration priority 4-14
arguments, firmware command 3-5
autoboot process 2-8
autojumpering (VME backplane) 1-12
B
backplane jumpers 1-12
baud rate, default 2-7
BBRAM (battery-backed-up RAM) and
clock 3-8, 4-8
BG (bus grant) signal 1-12
binary number, symbol for xvii
block diagram, MVME177P 4-4
board
architecture 4-1
connectors 4-14
dimensions A-1
features 4-1
installation 1-11
booting the system 2-8, 2-9, 2-10
BREAK key 2-12
break process 2-12
bus grant (BG) signal 1-12
C
cable connections 1-13
CD2401 serial communications controller
(SCC) 2-7, 4-9
CISC embedded controller(s) D-1
CLUN (controller LUN) C-1, D-1
command identifier, firmware 3-5
command line input, firmware 3-4
commands, firmware
CNFG (Configure Board Information
Block) 3-8
ENV (Set Bug/Operating System
Environment) 3-10
configuration switches
S3 (Petra SDRAM size) 1-9, 2-6
S4 (EPROM/Flash mode) 1-10, 2-6
Configure Board Information Block (CNFG)
firmware command 3-8