Technical data

3-18 Computer Group Literature Center Web Site
177Bug Firmware
3
VMEC2 GCSR Board Base
Address
00 Specifies base address ($FFFFD2XX) in Short
I/O for this board. Default = $00.
VMEbus Global Time Out Code 01 Controls VMEbus timeout when the
MVME177P is system controller. Default $01
= 64 µs.
Local Bus Time Out Code 02 Controls local bus timeout. Default $02 = 256
µs.
VMEbus Access Time Out Code 02 Controls the local-bus-to-VMEbus access
timeout. Default $02 = 32 ms.
Table 3-3. ENV Command Parameters (Continued)
ENV Parameter and Options Default Meaning of Default