VME Processor Modules Specification Sheet

ManualsBrandsMotorola ManualsComputer HardwareMVME5100 Series

MVME5100 Series

VME Processor Modules

♦ PowerPC 7400 or PowerPC 750

™

microprocessor with 32KB/32KB L1 cache

♦ Up to 2MB of secondary backside cache

♦ 100 MHz front-side bus

♦ 64MB, 128MB, or 512MB of on-board

ECC SDRAM—expandable up to 1GB

with optional RAM500 memory expansion

modules

♦ Up to 17MB Flash memory

♦ Dual IEEE P1386.1 compatible 32/64-bit

PMC expansion slots

♦ 64-bit PCI expansion mezzanine

connector allowing up to four more PMCs

♦ Dual 16550 compatible async serial ports

♦ Dual 10BaseT/100BaseTX Ethernet

♦ 32KB NVRAM and time-of-day clock with

replaceable battery backup

♦ Four 32-bit timers, one watchdog timer

♦ On-board debug monitor

♦ Single VME slot even when fully

configured with two PMC modules and

both add-on memory mezzanines

Supercomputing levels of performance in a scalable, single-board

computer

The MVME5100 is a high-performance VME processor module featuring the

Motorola Computer Group (MCG) PowerPlus II architecture with a choice of

PowerPC

processors—either Motorola’s MPC7400 with AltiVec

™

technol-

ogy for algorithmic-intensive computations or the low-power MPC750.

Based on an integrated PCI bridge–memory controller ASIC designed by

MCG, PowerPlus II takes memory performance to new levels with 582MB/s

memory read bandwidth and 640MB/s burst write bandwidth. Plus, Power-

Plus II architecture supports full PCI throughput of 264MB/s without starving

the CPU from its memory.

The MVME5100 is designed to meet the needs of OEMs servicing the military

and aerospace, industrial automation, and semiconductor process equipment

market segments.

Summary of content (5 pages)

PAGE 1
MVME5100 Series TM VME Processor Modules ♦ PowerPC 7400 or PowerPC 750™ microprocessor with 32KB/32KB L1 cache ♦ Up to 2MB of secondary backside cache ♦ 100 MHz front-side bus ♦ 64MB, 128MB, or 512MB of on-board ECC SDRAM—expandable up to 1GB with optional RAM500 memory expansion modules ♦ Up to 17MB Flash memory ♦ Dual IEEE P1386.
PAGE 2
SDRAM Expansion 256MB PMC P11 & P12 SDRAM Expansion ECC SDRAM 64, 128 or 512MB Serial Serial 16550 PIB RJ-45 16550 WB-554 ISA BUF X-Bus 64-bit/33 MHz Local PCI Bus FP I/O PCI Expansion PMC2 Super I/O ESCC CIO LSI National 85230 8536 82559ER FP I/O PMC1 SCSI Ethernet VME Ethernet Universe2B 82559ER Rows A & C 64-pins Rows D & Z 46-pins P2 RJ-45 RJ-45 P1 MVME5100 Block Diagram MVME5100 P2 I/O MVME5100 P2 I/O I/O Compatibility Historically, MCG has offered two tracks in it
PAGE 3
face signals to the MVME712M transition module. The 3-row P2 adapter can be used for 8-bit SCSI. To gain access to the additional user definable I/O pins provided via the 5-row VME64 extension connector, a special P2 adapter board is available. This adapter panel replaces the traditional 3-row P2 adapter and extends its capability by providing access to the PMC I/O pins.
PAGE 4
Parallel Port PCI Expansion Connector Address/Data: PCI Bus Clock: Signaling: Connector: Controller: A32/D32/D64 33 MHz 114-pin connector located on the planar of the MVME5100 Modes: Master only Power Requirements (not including power required by PMC or IMPC modules) +5V ± 5% +12V ± 10% –12V ± 10% MVME5100 with MVME761: 8-bit bi-directional, full IEEE 1284 support; Centronics compatible (minus EPP and ECP on MVME712M) 5V Power Requirements MVME5100: PC97307 Configuration: 3.0 A typ. 3.2 A typ.
PAGE 5
Demonstrated MTBF MVME761 Compatible I/O (based on a sample of eight boards in accelerated stress environment; results pending for IPMC712) Mean: 190,509 hours 95% Confidence: 107,681 hours IPMC761-001 MVME761-001 Transition module: Two DB-9 async serial port connectors, two HD-26 sync/async serial port connectors, one HD-36 parallel port connector, one RJ-45 10/100 Ethernet connector; includes 3-row DIN P2 adapter module and cable (for 8-bit SCSI) MVME761-011 Transition module: Two DB-9 async ser