Specifications

5-56
P460/P360 Memory Scanners Product Reference Guide
Set Lengths for Code 93
Lengths for Code 93 may be set for any length, one or two discrete lengths, or lengths
within a specific range. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s) the code contains. The default is set to a
length of 4 to 55 characters.
One Discrete Length - This option allows you to decode only those codes containing a
selected length. For example, if you select Code 93 One Discrete Length, then scan 1, 4,
only Code 93 symbols containing 14 characters are decoded. Numeric bar codes begin
on page 5-99. If you make an error, or wish to change your selection, scan CANCEL on
page 5-101.
CODE 93 - ONE DISCRETE LENGTH
Two Discrete Lengths - This option allows you to decode only those codes containing two
selected lengths. For example, if you select Code 93 Two Discrete Lengths, then scan 0,
2, 1, 4, only Code 93 symbols containing 2 or 14 characters are decoded. Numeric bar
codes begin on page 5-99. If you make an error, or wish to change your selection, scan
CANCEL on page 5-101.
CODE 93 - TWO DISCRETE LENGTHS