Specifications

1-3
The Phaser Series Scanner
Quick Startup Instructions
Below is an index of Quick Startup Instructions to help get you up and going quickly. These
instructions are also on the back cover of this guide for easy reference. The index is listed
in a step by step order beginning with step 1, Setting up the System.
Mandatory steps are designated by an asterisk (*). If an item has multiple pages
referenced, the most important reference is in bold.
1. Setting Up the System PRG Page
• Connecting to a host * 2-8
- Using a cradle 1-2, 2-4, 3-6
- Using a cabled scanner 2-2, 2-6
- RS-232 connection 2-8
- Synapse connection (keyboard wedge, USB, etc.) 2-9, 2-10
• Charging the battery * 2-5, 1-2
2. Using the Default Applications
• Overview of Batch/Inventory application (Uncorded operation) * 3-2
- Reviewing/deleting stored records 3-5
- Transmitting batch/stored data to the host 3-6
• Overview of Scan and Transmit application (Corded operation) * 3-7
• Keypad operation 3-3, 3-26
• Eliminating repetitive scanning 3-4
• Selecting the host communication protocol 3-2, 3-9, 5-8, 5-8
- RS-232 baud rate 5-83
3. Programming an Advanced Data Formatting Rule Using 123Scan 3-17
• Suffix values (appending Enter key and Tab) 3-18, 3-20
4. Troubleshooting Problems
• Troubleshooting table 4-2
• Messages and error codes B-1
• Beeper indications 4-9
• Cradle LED indications 1-2, 2-6