Specifications

3-13

Operation

2. System Code Updates the scanner operating system (Firmware). An RS-232

cable is required. It connects the scanner (not the cradle) to the

host. To enter this mode using the key pad, select this option on

the system menu.

Press the <ENTER> key to confirm the choice (Yes) or the <BK>

key to cancel the choice (No).

To enter this mode from an application without entering the

system menu, scan the bar code below.

Attach the RS-232 cable and press <ENTER> to start the

download.

After the download is complete, the system menu is exited and

the application initiates.

To exit this mode and prevent the download of new firmware,

press and hold the <ENTER> key for 30 seconds.

9. Back to Main Returns the user to the system menu.

Option Description

Load New System Code

<Enter>=Yes

<BK>=No

System Code

Attach RS232 Cable

and Press ENTER

Scanner ready,

On PC start download