Specifications

4-9
Maintenance And Specifications
Beeper Indications
Table 4-5. Beeper Indications
Beeper Sequence Indication
Standard Use
Short high tone A bar code symbol was decoded (if decode beeper is enabled).
4 Beeps - long low tone A transmission error has been detected in a scanned symbol. The
data is ignored. This occurs if a unit is not properly configured.
Check option settings.
5 Beeps - low tone Convert or format error.
Hi/hi/hi/lo tone RS-232 receive error.
4 Beeps - short hi Battery requires recharging.
Short low/Short high tone The Scanner detected external power supplied to it by the cradle
or a cable.
Short high/Short low tone External power has been removed from the scanner.
Parameter Menu Scanning
Short high tone Correct entry scanned or correct menu sequence performed.
Long low/Long high tone Input error, incorrect bar code or “Cancel” scanned, wrong entry,
incorrect bar code programming sequence; remain in program
mode.
Hi/lo tone Keyboard parameter selected. Enter value using bar code
keypad.
Hi/lo/hi/lo tone Successful program exit with change in the parameter setting.